Bore water desalination, bore pumps & water treatment across Victoria

Optimal water quality for hydroponic flowers requires maintaining specific levels of pH, electrical conductivity (EC), and temperature, while ensuring the water is free of harmful contaminants.

ParameterOptimal RangeImpact if Unbalanced
pH5.5 to 6.5Affects nutrient availability and absorption; incorrect levels can lead to deficiencies or toxicities.
EC / TDSVaries by flower species; start low 0-100 TDS), building up to a target range for the plant’s stage.Measures nutrient concentration (dissolved salts); too high causes “nutrient lockout” or root burn, too low causes deficiencies.
Temperature18°C to 22°C (65°F to 75°F)Influences dissolved oxygen (DO) levels and plant metabolic rates; warmer water holds less oxygen and can promote root disease.

Source Water Options

The best starting water has a low baseline EC/TDS (close to zero) to give you complete control over the nutrient mix.

  • Reverse Osmosis (RO) or Distilled Water: These are ideal as they are nearly pure, offering a “clean slate” for adding specific, balanced nutrients without introducing unwanted contaminants or excessive minerals found in tap water. RO systems are a common solution for large-scale operations.
  • Rainwater: An environmentally friendly option that is low in minerals, but it should be filtered and sanitized to remove potential bacteria, dirt, and pollutants before use.
  • Tap Water: Usable in many cases, but its quality varies by location and can change seasonally. It may contain chlorine, chloramines, or high levels of calcium and magnesium (“hard water”), which can cause issues.

Download the original document

Leave a Reply

Your email address will not be published. Required fields are marked *